Hybrid Nano Reinforced Lightweight Materials Development for Sustainable High Performance Manufacturing Systems

Iman Mujiarto; Ratna Dwi Kurniawan; Suyanto

doi:10.55927/fjst.v5i4.32

Authors

Iman Mujiarto Politeknik Negeri Semarang
Ratna Dwi Kurniawan Politeknik Negeri Semarang
Suyanto Politeknik Negeri Semarang

DOI:

https://doi.org/10.55927/fjst.v5i4.32

Keywords:

Hybrid Nanocomposites, Lightweight Materials, Sustainable Manufacturing.

Abstract

The demand for sustainable and high-performance manufacturing systems has accelerated the development of advanced lightweight materials. Hybrid nano-reinforced materials offer enhanced mechanical and thermal properties while maintaining reduced weight. This study aims to develop and evaluate hybrid nano-reinforced lightweight materials for sustainable manufacturing applications. An experimental approach was employed through material synthesis and characterization, including mechanical and thermal testing. The results show that hybrid nano-reinforcement significantly improves tensile strength, hardness, and thermal stability. The developed materials also demonstrate better performance under operational conditions, indicating their potential for advanced manufacturing systems. This study concludes that hybrid nano-reinforced lightweight materials provide an effective solution for improving material performance while supporting sustainability in manufacturing

References

Ahmed, S., Raza, S. A., & Khan, M. A. (2024). Sustainable materials for advanced manufacturing: A review. Journal of Cleaner Production, 421, 138412. https://doi.org/10.1016/j.jclepro.2023.138412

Al-Saadi, A., Rahman, M. M., & Baig, M. (2023). Thermal conductivity enhancement in hybrid nanocomposites: A review. Case Studies in Thermal Engineering, 45, 102908. https://doi.org/10.1016/j.csite.2023.102908

Azevedo, J., Travassos, M. A., & Ribeiro, M. C. (2023). Sustainable lightweight materials in engineering applications: A review. Sustainable Materials and Technologies, 35, e00521. https://doi.org/10.1016/j.susmat.2023.e00521

Babu, K., Rendén, G., & Oksman, K. (2021). Bio-based hybrid nanocomposites for lightweight applications. Composites Part A: Applied Science and Manufacturing, 140, 106168. https://doi.org/10.1016/j.compositesa.2020.106168

Chandrasekaran, S., Seidel, C., & Schulte, K. (2021). Preparation and characterization of hybrid nanocomposites. Composites Science and Technology, 207, 108677. https://doi.org/10.1016/j.compscitech.2021.108677

Chen, X., Liu, Y., & Wang, H. (2023). Performance evaluation of advanced composite materials for engineering applications. Materials Today Communications, 35, 105678. https://doi.org/10.1016/j.mtcomm.2023.105678

Das, T. K., Prusty, S., & Swain, S. K. (2022). Dispersion of nanoparticles in polymer nanocomposites: Challenges and advancements. Materials Today Chemistry, 23, 100689. https://doi.org/10.1016/j.mtchem.2021.100689

Dursun, T., & Soutis, C. (2021). Recent developments in advanced aircraft materials. Materials & Design, 202, 109589. https://doi.org/10.1016/j.matdes.2021.109589

Huang, Y., Young, R. J., & Kinloch, I. A. (2021). The role of interfacial interactions in nanocomposites. Composites Part A: Applied Science and Manufacturing, 147, 106467. https://doi.org/10.1016/j.compositesa.2021.106467

Hussain, F., Hojjati, M., Okamoto, M., & Gorga, R. E. (2022). Polymer-matrix nanocomposites: Processing, manufacturing, and application. Journal of Composite Materials, 56(4), 545–568. https://doi.org/10.1177/00219983211021506

Jawaid, M., Thariq, M., & Saba, N. (2021). Hybrid nanocomposites: Processing, properties, and applications. Elsevier. https://doi.org/10.1016/C2019-0-03554-7

Khan, A., Hussain, S., & Imran, M. (2021). Advanced materials for high-performance manufacturing systems. Materials Today: Proceedings, 47, 1234–1240. https://doi.org/10.1016/j.matpr.2021.05.210

Kumar, R., & Singh, I. (2021). Hybrid nanocomposites for structural applications: A review on mechanical and thermal properties. Materials Today: Proceedings, 45, 3456–3462. https://doi.org/10.1016/j.matpr.2021.02.567

Kumar, S., Singh, R., & Kumar, A. (2022). Influence of nanoparticle dispersion on mechanical properties of nanocomposites. Materials Today Communications, 33, 104540. https://doi.org/10.1016/j.mtcomm.2022.104540

Kumar, S., Verma, A., & Gupta, R. (2023). Fabrication techniques of hybrid nanocomposites: A review. Materials Today: Proceedings, 74, 178–185. https://doi.org/10.1016/j.matpr.2022.11.210

Li, X., Chen, Y., & Wang, Z. (2023). Challenges and opportunities in nano-reinforced composite materials for industrial applications. Composites Part B: Engineering, 258, 110711. https://doi.org/10.1016/j.compositesb.2023.110711

Liu, Q., Zhang, Y., & Li, J. (2023). Thermal behavior of hybrid nanocomposites for high-temperature applications. Journal of Materials Science, 58(12), 9854–9868. https://doi.org/10.1007/s10853-023-08321-4

Nayak, S., Mohanty, S., & Nayak, S. K. (2022). Hybrid nanocomposites: A review of mechanical and thermal properties. Composites Part B: Engineering, 234, 109742. https://doi.org/10.1016/j.compositesb.2022.109742

Patel, H., Mehta, P., & Shah, R. (2024). Lightweight materials for sustainable engineering applications. Materials Today Sustainability, 25, 100512. https://doi.org/10.1016/j.mtsust.2024.100512

Patel, K., Shah, D., & Mehta, P. (2022). Thermal analysis of nano-reinforced composites for high-temperature applications. Thermochimica Acta, 713, 179260. https://doi.org/10.1016/j.tca.2022.179260

Peng, T., Kellens, K., Tang, R., Chen, C., & Chen, G. (2023). Sustainability evaluation of manufacturing processes: A review. Journal of Cleaner Production, 405, 136777. https://doi.org/10.1016/j.jclepro.2023.136777

Rahman, M. M., Alim, M. A., & Hossain, M. (2021). Hybrid nanomaterials for structural applications: Processing and properties. Journal of Composite Materials, 55(18), 2471–2485. https://doi.org/10.1177/0021998320987654

Ramesh, M., Palanikumar, K., & Reddy, K. H. (2021). Mechanical performance of nanocomposites: A review. Journal of Materials Research and Technology, 11, 1382–1396. https://doi.org/10.1016/j.jmrt.2021.01.103

Rao, R. N., Das, S., & Mondal, D. P. (2021). Mechanical behavior of nano-reinforced composites: Experimental analysis. Materials Science and Engineering A, 805, 140592. https://doi.org/10.1016/j.msea.2021.140592

Reddy, M. M., Raju, G. U., & Rao, K. S. (2023). Synergistic effects of hybrid nanofillers in composite materials. Journal of Composite Materials, 57(10), 1453–1468. https://doi.org/10.1177/00219983231123456

Saba, N., Jawaid, M., & Asim, M. (2021). Recent advances in hybrid polymer nanocomposites. Journal of Materials Research and Technology, 15, 2415–2431. https://doi.org/10.1016/j.jmrt.2021.09.010

Sharma, P., Singh, V., & Chauhan, S. (2022). Effect of nanoparticle loading on composite performance. Materials Research Express, 9(8), 085302. https://doi.org/10.1088/2053-1591/ac8d45

Shen, L., Wang, L., & Zhang, Y. (2022). Interfacial engineering in nanocomposites: Mechanisms and applications. Composites Science and Technology, 223, 109415. https://doi.org/10.1016/j.compscitech.2022.109415

Singh, S., Kumar, A., & Gupta, M. (2022). Dispersion and interfacial characteristics of hybrid nanocomposites. Materials Today Communications, 31, 103449. https://doi.org/10.1016/j.mtcomm.2022.103449

Wang, H., Chen, X., & Liu, Z. (2021). Agglomeration effects in nanocomposites: Challenges and solutions. Nanomaterials, 11(7), 1832. https://doi.org/10.3390/nano11071832

Yadav, S., Mishra, R. K., & Srivastava, R. (2023). Advanced manufacturing techniques for nanocomposites. Materials Today: Proceedings, 72, 2211–2216. https://doi.org/10.1016/j.matpr.2022.09.412

Yusuf, M., Khan, M. A., & Islam, S. (2022). Experimental approaches in advanced materials research: A review. Journal of Materials Engineering and Performance, 31(5), 3456–3470. https://doi.org/10.1007/s11665-022-06678-9

Zhang, H., Liu, Y., & Zhao, L. (2022). Lightweight materials for energy-efficient manufacturing systems: A review. Materials & Design, 221, 110939. https://doi.org/10.1016/j.matdes.2022.110939

Zhang, X., Li, W., & Zhao, H. (2021). Interfacial bonding and mechanical performance of nanocomposites. Composites Science and Technology, 208, 108736. https://doi.org/10.1016/j.compscitech.2021.108736

Zhou, Y., Chen, J., & Zhang, X. (2022). Interfacial engineering in polymer nanocomposites. Polymer, 247, 124788. https://doi.org/10.1016/j.polymer.2022.124788